Stainless Steel Dutch Weave Wire Mesh with Precise Flowing Rate for Filtration
Something You Need to Know About Dutch Weave Wire Mesh Before Order
Normally, Dutch Weave Wire Mesh is used to make filter media, such as filter discs, filter gaskets and etc. KDL Dutch Weave Wire Mesh is available in various meshes and sizes, each with its own advantages. There are mainly three types of dutch weave wire mesh, including plain dutch weave, twilled dutch weave, and reversed dutch weave. These types of wire mesh are available in Stainless Steel AISI304(304L), and AISI316(316L). Besides, some of them also could be done with mild steel, or special alloy, depending on your unique use and requirements.
Plain Dutch Weave type has more strength and rigidity than normal woven mesh and better filtration capabilities.
Each warp wire with a bigger wire diameter passes alternately over and under one weft wire to offer high tensile strength for the mesh.
| Plain Dutch Weave Wire Mesh Specifications |
| Mesh count | Flowing Rate (micron) | Weight Kg/m2 | Mesh Thickness (mm) |
| 8x85 | 330 - 350 | 2.5 | 0.93 |
| 10x70 | 315 - 335 | 3 | 1.04 |
| 12x64 | 280 - 300 | 4.1 | 1.21 |
| 10x90 | 270 - 290 | 2.5 | 0.93 |
| 14x88 | 280 - 300 | 3.15 | 0.76 |
| 12x95 | 240 - 260 | 2.3 | 0.79 |
| 14x110 | 220 - 240 | 2.15 | 0.72 |
| 18x100 | 200 - 210 | 2.05 | 0.69 |
| 20x150 | 170 - 190 | 1.6 | 0.55 |
| 20x150 | 160 - 180 | 1.55 | 0.5 |
| 22x140 | 140 - 170 | 2.1 | 0.66 |
| 24x110 | 100 - 112 | 2.5 | 0.76 |
| 30x150 | 80 - 100 | 1 | 0.5 |
| 40x200 | 75 - 80 | 1.3 | 0.4 |
| 50x280 | 71 - 75 | 1 | 0.32 |
| 50x250 | 56 - 63 | 1 | 0.32 |
| 80x400 | 36 - 45 | 0.82 | 0.23 |
| 80x300 | 32 - 36 | 0.98 | 0.25 |
Twilled Dutch Weave offers even higher strength and finer filtration rates. In the twilled weave, the wires cross two under and two over, allowing heavier wires and higher mesh counts.
| Twilled Dutch Weave Wire Mesh Specifications |
| Mesh count | Flowing Rate (micron) | Weight Kg/m2 | Mesh Thickness (mm) |
| 24x300 | 112 - 118 | 2.85 | 0.63 |
| 20x260 | 110 - 120 | 3.1 | 0.67 |
| 30x250 | 100 - 112 | 3.2 | 0.65 |
| 40x560 | 71 - 80 | 1.7 | 0.39 |
| 80x700 | 34 - 36 | 1.2 | 0.26 |
| 165x1100 | 20 - 21 | 0.9 | 0.16 |
| 165x1400 | 15 - 18 | 0.7 | 0.15 |
| 200x1400 | 11 - 13 | 0.75 | 0.14 |
| 250x1400 | 11 - 12 | 0.68 | 0.12 |
| 325x2300 | 7 - 8 | 0.47 | 0.09 |
| 400x2800 | 5 - 6 | 0.36 | 0.06 |
Reversed Dutch Weave wire mesh also uses two sizes of wire diameter, finer wire in one direction and coarser wire in the other direction. In reversed dutch weave, the coarser wire is in the weft direction and the finer wire is in the warp direction. This is different from the Plain and Twilled Dutch Weave types.
| Reversed Dutch Weave Wire Mesh Specifications |
| | Wire Dia. mm | Mesh Thickness mm |
| Warp | Weft | Warp | Weft |
| 72 | 15 | 0.5 | 0.5 | 1.8 |
| 132 | 14 | 0.355 | 0.45 | 1.4 |
| 132 | 18 | 0.355 | 0.45 | 1.4 |
| 152 | 24 | 0.315 | 0.355 | 1.04 |
| 228 | 36 | 0.19 | 0.28 | 0.85 |
King De Long Wire Mesh is here to help you to find the right wire mesh for your project. If you have any questions regarding the flowing rate of the dutch weave wire mesh or whether plain dutch weave, twilled dutch weave or reversed dutch weave is the right to choose, please contact us right now. We will reply to you in the next 12 hours.
Attention
Be careful of the cutting sharp edge, and avoid getting hurt while open and use.
Before you order your mesh, please first check out our stock list, where we put our over-run bargain rolls at lower prices.
King De Long Wire Mesh can manufacture not only woven wire mesh but also welded wire mesh with the specified wire and mesh size you required. Should you have a particular specification in mind, please contact us to discuss your requirements.
For your reference, some photos of our products and factory are listed here, please check.
Product Tags:
|
|
High Tensile AISI304L 200 Micron Stainless Steel Filter Mesh Precise Flowing Rate Images
|
